|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
S/MON/SWM862080/A/13/03/2000 page 1 /2 F/GB Relais statique monophase de puissance Pret a l'emploi. Ready to use Solid State Relay * Sortie AC synchrone : 24-510VAC-30A (50A thyristors) * Pret a l'emploi . Protection VDR ; LED de visualisation ; IP20 * Adapte a tout type de charges,et specialement aux resistances de chauffage: 5KW/230VAC;9KW/400VAC * Zero cross AC output : 24/510VAC-40A (50A thyristors) * Ready to use . VDR protection. LED . IP20 . * Designed for all types of loads,and specially for resistive loads: 5KW/230VAC;9KW/400VAC Dimensions/Size SWM862080 17-60VAC/DC control 30A/400VAC output Application typique/Typical application 24-510VAC protection reseau line protection 120 100 72 A2 Entree control 17-60VAC 25 48 1L1 = A1 LED 2T1 * 1L1-2T1 peuvent etre inversees/ 1L1 -2T1 can be changed mounting system with DIN RAIL or screws CHARGE/LOAD Caracteristiques de commande (a 20C) / Control characteristics (at 20C) AC/DC Parametre / Parameter Symbol Min Nom Tension de commande / Control voltage Uc 17 24 Courant de commande / Control current (@ Uc ) Ic 10 14 Tension de relachement/Release voltage Uc off 1 Resistance interne / Input internal resistor fig.1 Rc 1700 Tension inverse / Reverse voltage Urv 60 Caracteristiques d'entree-sortie (a 20C) / Input-output characteristics (at 20C) Isolement entree-sortie/Input-output isolation @500m Ui 4000 Isolement sortie-semelle/Output-case isolation @500m Ui 3300 Tension assignee Isolement/Rated impulse voltage Uimp 4000 Caracteristiques generales / General characteristics Parametre / Parameter Poids/Weight Plage de temperature de stockage / Storage temprange Plage de temperature de fonctionnement/Operating temprange fig. 1 :Caracteristique d'entree / Control characteristic Max 60 35 Unit V mA V V VRMS VRMS 35 30 25 20 15 10 5 0 0 10 20 30 Uc(V) 40 50 60 V Conditions Ic(mA) Symbol Typ. 450 -40 / +100 -40 / +100 Unit g C C Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s S/MON/SWM862080/A/13/03/2000 Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parametre / Parameter Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Tension crete / Peak voltage Niveau de synchonisation / Synchronizing level Tension d'amorcage / Latching voltage Courant nominal AC-51/ AC-51 nominal current Courant nominal AC-53/ AC-53 nominal current Courant de surcharge non repetitif /Non repetitive overload current Chute tension directe crete/ On state voltage drop Courant de fuite etat bloque/ Off state leakage current Courant de charge minimum / Minimum load current Temps de fermeture/ Turn on time Temps d'ouverture/ Turn off time Plage de frequence / Operating frequency range dv/dt etat bloque / Off state dv/dt dI/dt maximum non repetitif/ Maximum di/dt non repetitive I2t (<10ms) EMC Test d'immunite conduite / Conducted immunity level EMC Test d'immunite conduite / Conducted immunity level Conformite / Conformity 40 page 2 / 2 F/GB Conditions Symbol Typ. Unit Ue 400 V rms Uemin-max 24-510 V rms Up 1200 V Usync 24 V Ua 8 V Ie AC-51 30 A rms Ie AC-53 9 A rms Itsm 550 A Vd 1,3 V Ilk <3 mA Iemin 5 mA ton max 10 ms toff max 10 ms f 0,1-440 Hz dv/dt 500 V/s di/dt 50 A/s I2t 1500 A2s 4kV criterion A 4kV criterion A Ie nom ( see Fig. 2 ) ( see Fig. 2 ) tp=10ms (Fig. 3) @ Ie nom @Ue, 50Hz Uc nom DC ,f=50Hz Uc nom DC ,f=50Hz IEC 1000-4-4 (burst) IEC 1000-4-5(schocks) EN60947-4-x Permanent load current (ARMS) (AC-51 current ) 35 30 25 20 15 10 5 0 0 10 20 30 40 2 Fig. 2 Courbes thermiques / Thermal characteristics 1 50 60 70 80 90 100 110 120125 Ambient temperature (C) 1 : Max. heatsink temperature = 80C (In compliance with EN60947-1) 2 : Max. heatsink temperature = 100C (Max. thermal characteristic of the assembly) Fig.3 Surcharge de courant : Itsm (Apeak) = f(t) pour modele 50A(Itsm=550A) Surge current : Itsm (Apeak) = f(t) for 50A models with Itsm =550A 600 Itsm (Apeak) 400 Surcharge de courant non repetitive sans tension reappliquee / No repetive surge current without voltage reapplied. 1 -Itsm non repetitif sans tension reappliquee est donne pour la determination des protections. No repetitive Itsm is given without voltage reapplied for the determination of the protection. 2 -Itsm repetitif est donne pour des surcharges de courant (Tj initiale=70C). La repetition de ces surcharges de courant diminue la duree de vie du Relais. Repetitive Itsm is given for inrush current with initial Tj = 70C. The repetition of the surge current decrease the lifetime SSR's . 200 Surcharge de courant repetitive avec tension reappliquee Repetive surge current with voltage reapplied. 0 0,01 0,1 t (s) 1 10 Precautions : * Les relais a semiconducteurs ne procurent pas d'isolation galvanique entre le reseau et la charge. Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains. celduc r e l a i s www.celduc.com Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19 |
Price & Availability of SWM862080 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |